LORD^® Engineered Adhesives

Key Benefits of LORD Acrylic Adhesives are: Resist severe environmental conditions Bond with minimal surface preparation Offer fast cure at room temperature Are easy to use and offer a convenient, no-mix feature Have 100% reactive formulations to meet VOC regulations

Acrylic Adhesives

The best way to describe LORD^® Acrylic Adhesives is "versatile." These adhesives are ideal for use with a wide range of materials, including minimally prepared or unprepared metal surfaces. LORD 200 and 400 Series Acrylic Adhesives carry the distinction of bonding the largest variety of metals in the world.

LORD Acrylic Adhesives are toughened to provide increased durability and impact strength. The are not limited to metal applications; they also bond plastics and ceramics, thermoplastics like polycarbonate and ABS, and thermosets like fiberglass, Sheet Molded Compounds (SMCs) and Fiber Reinforced Plastics (FRPs).

LORD Acrylic Adhesives are two-part systems that use accelerators to cure.

LORD 200 Series

LORD 200 Series Acrylic Adhesives bond minimally prepared or unprepared surfaces with very high strength. They offer excellent adhesion to unprepared metals, ceramic magnets and plastics. Viscosities range from liquid to paste. Handling time range from 2 to 60 minutes.

LORD 400 Series

LORD 400 Series Acrylic Adhesives offer extremely high impact and peel strength. They bond minimally prepared metals and plastics and achieve high shear strengths. They also provide excellent environmental and chemical resistance. Handling times range from 4 to 120 minutes.

LORD 506

LORD 506 Acrylic Adhesive is semi-flexible and heat resistant. This general purpose adhesive bonds a wide variety of thermoplastics and thermoset plastics. Handling times range from 8 to 12 minutes.

LORD 600 Series

LORD 600 Series Acrylic Adhesives bond Fiber-Reinforce Plastics (FRPs) with minimal surface preparation. These non-sag adhesives cross bond FRPs to many metals and are specifically formulated to produce the highest impact and peel strengths available in room-temperature curing adhesives.

LORD Accelerators

* GB products contain 0.010" diameter glass beads for bondline thickness control.

Cautionary Information
Before using any LORD product, refer to the Material Safety Data Sheet (MSDS) and label for safe use and handling instructions.