|
|
 |
Sealers & Foams
Foams
|
121/124 |
121 = 10.1 oz (300 mL)
124 = 1.7 oz (50 mL) |
|
|
Flexible Foam (Super Fast) |
Applications
Sound deadening, sealing and filling of: door skins to crash bar, hood panel to supports, trunk panel to supports and gas tank filler area.
Substrates
Primed or painted metals and all plastics.
Features & Benefits
- Matches OEM sound deadening foams
- Retains its memory with no shrinkage
- Expands to 10 times its size
- Will not oil can
- Will not absorb moisture or cause corrosion
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
5 - 10 sec. |
| Handling Strength |
Full expansion in 2 - 3 min. |
| Part Paintability |
10 min. |
|
|
130 |
130 = 10.1 oz (300 mL) |
|
|
Rigid Acoustical Foam (Super Fast) |
Applications
Sound deadening, vibration dampening, reinforcement, sealing and filling of: fender reails, pillars, rocker panels, quarter panels and floors.
Substrates
Primed or painted metals and all plastics.
Features & Benefits
- Matches OEM sound deadening foams commonly found in pillars, front rails, rockers and rear supports
- Provides NVH properties for a quieter ride
- Tough compressive strength for maximum energy absorption
- Super fast application, providing full foam expansion in 3 minutes
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
10 - 20 sec. |
| Handling Strength |
Full expansion in 3 - 4 min. |
| Part Paintability |
10 min. |
| Adhesive Sandability |
Not applicable |
| Full Cure |
1 hr. |
|
| 1908 |
1908 = 7.6 oz (225 mL) |
|
|
Structural Foam (Medium) |
Applications
Structural enhancement, stiffness and sound/vibration dampening to rails, pillars, supports and frames. Use of Fusor 304X pneumatic gun is recommended for best application.
Substrates
Oily metal, bar metal or painted surfaces.
Features & Benefits
- Restores OEM structural integrity
- Same formula as used in OEM assembly applications
- Bonds to oily metal or painted surfaces
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
15 min. |
| Handling Strength |
30 min. |
| Full Cure |
24 hr. | |
Two-Part Seam Sealers
|
122EZ |
122EZ = 10.1 oz (300 mL) |
|
|
Self-Leveling Seam Sealer (Fast) |
Applications
Drip rails, trunks, core support to aprons, roof seams and quarter panel to rear deck.
Substrates
Can be used over fully cured acid-etch primers, urethane primers and epoxy primers.
Features & Benefits
- Perfectly matches factory flow-grade seams
- No tooling required
- Permanently flexible
- Sandable
- Color changes to indicate cure
|
OEM Approvals
Ford: Roof ditch sealer replacement
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
|
Work Time
Work Time @ 90°F (32°C) |
8 - 9 min.
6 min. |
| Full Cure |
24 hr. |
| Part Paintability |
30 min. |
| Sealer Sandability |
30 min. |
|
| 123/126 |
123 = 10.1 oz (300 mL)
126 = 1.7 0z (50 mL) |
|
|
Non-Sag Seam Sealer (Fast) |
Applications
Duplicates factory look on the following seams: truck beds, tooled door skin, floor pan, core support and any other application in which a non-sag cosmetic seam sealer is required and where fast work time is desired.
Substrates
Can be used over epoxy and urethane primers (when using acid-etch primers, use 123EZ).
Features & Benefits
- Duplicates factory appearance
- Gets the job done in 10 minutes
- Bright white color
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
3 - min. |
| Part Paintability |
10 min. (Paint within 24 hours or scuff before painting) | |
| 123EZ/126EZ |
123EZ = 10.01 oz (300 mL)
126EZ = 1.7 oz (50 mL) |
|
|
Non-Sag Seam Sealer (Medium) |
Applications
Duplicating factory look on the following seams: truck beds, tooled door skin, floor pan, core support and any other application in which a non-sag cosmetic seam sealer is required and where longer work time is desired.
Substrates
Can be used over fully cured acid-etch primers, urethane primers and epoxy primers.
Features & Benefits
- Duplicates factory appearance
- Longer work time
- Sandable
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
8 - 9 min. |
| Adhesive Sandability |
30 min. |
| Part Paintability |
30 min. | |
| 129 |
129 = 10.1 oz (300 mL) |
|
|
Controlled Flow Seam Sealer (Fast) |
Applications
Excellent for roof channels, door seams, drip rails and truck bed floor seams and trunk seams.
Substrates
Can be used over epoxy and urethane primers and fully cured acid-etch primers.
Features & Benefits
- Provides smooth continuous beads with no gun lines
- No tooling required for factory look
- Sandable
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
5 - 8 min. |
| Adhesive Sandability |
30 min. |
| Part Paintability |
30 min. | |
One-Part Seam Sealers
|
800EZ/801EZ/802EZ/803EZ |
800EZ= 10.3 oz (305 mL)-Neutral
801EZ= 10.3 oz (305 mL)-Neutral
802EZ= 10.3 oz (305 mL)-White
803EZ= 10.3EZ (305 mL)-Black |
|
|
Factory Match Urethane Sealer/Adhesive |
Applications
Duplicates factory look on standing seams, cosmetic seams, truck bed seams, tooled door skin seams, floor pan seams, core support seams and brushed seams and any other application in which a non-sag cosmetic seam sealer is required.
Substrates
Can be used over epoxy and urethane primers.
Features & Benefits
- No shrinkage, no cracking
- New and improved non-sag formula — will hold brush strokes for the OEM look
- Available in neutral (cartridges and Chub pack) white and black (cartridges)
- Tools easily with water
|
OEM Approvals
Ford: Body seam sealing per 02S33
GM: Body seam sealing per CHG20010140.
Meets Nissan: NTB96-034B
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
30 min. |
| Full Cure |
72 hr. |
| Part Paintability |
30 min. |
|
| 804 |
10.5 oz (310.5 mL) |
|
|
Sprayable Seam Sealer (Gray) |
Applications
Create flexible textured seams including floor pan, truck pan, strut tower, exterior and truck box seams. Restore rocker panel chip guard texture and trunk area texture.
Substrates
Any scuffed primed surface including metal and SMC/fiberglass.
Features & Benefits
- Gray color, easy to paint over
- Paintable immediately or up to four days
- Perfectly duplicates OEM textured seams
- Extremely flexible — won’t crack or peel
- Perfectly matches all OEM seams and textures with use of Fusor 312 dispense gun
|
OEM Approvals
GM: Sound deadening replacement material per TSB #07-08-51-001
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
15 min. |
| Skin Time |
20 min. |
| Part Paintability |
Immediately or within 4 days | |
| 805 |
10.5oz (310.5 mL) |
|
|
Wheel House Coating and Sound Deadener (Black) |
|
Applications
duplicates factory coatings on wheel houses, under carriages, spare tire wells, floors, outer side of front apron, lower rear body panels and rocker panels. Duplicates OEM sound deadening material.
Substrates
Any scuffed primed surface including metal and SMC/fiberglass.
Features & Benefits
- Matches OEM wheel house textures
- Perfect for replacing sound deadening pads
- Excellent to irregular contours
- Paintable immediately or up to four days
- Perfectly matches all OEM seams and textures with use of Fusor 312 dispense gun
|
OEM Approvals
GM: Sound deadening replacement material per TSB #07-08-51-001
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
15 min. |
| Skin Time |
20 min. |
| Part Paintability |
Immediately or within 4 days | |
| 806 |
10.5oz (310.5 mL) |
|
|
Sprayable Seam Sealer and Texturizer |
|
Applications
Duplicates tough, OEM chip guard appearances on lower body panels. Duplicates sound deadening material on interior surfaces of floor panels.
Substrates
Prepared surfaces including primed or painted metal and SMC/fiberglass.
Features & Benefits
- Beige color matches European and Asian vehicles
- Tough, flexible surface protects metal from stone chips
- Paintable immediately or within two hours
- Skins fast, reducing repair time
- Excellent adhesion to metals and composite plastics
- Duplicates OEM chip guard finishes
- Easy to apply using LORD Fusor 312 sprayable seam sealer gun
|
Download User Instructions »
Where to Buy » |
|
Times listed are at 70°F (21°C) unless noted |
| Work Time |
10 min. |
| Skin Time |
15 min. |
| Full Cure Strength (1/8" thick) |
24 hr. |
| Part Paintability |
Immediately or within 2 hours | |
|
|
 |
REPAIR PROCEDURES |
|
|
|
|
TECHNICAL TIPS |
|
|
|
|